break page by text in htmltools command line

I'm evaluating to buy the product,

why, when I put the   -htm2pdf2   not working -delbreakpagetext -breakpagebytext "SartaAk"and their images do not appear, only appearing a lot "  !   "

in our evaluation tests, it seems that with this parameter sizes of pages work best, but we stopped that detail

our command line:
htmltools.exe -view -width 720 -height 1050 -pageheight 1090 -nocenter -htm2pdf2 -playemf2 -pdfx -delbreakpagetext -breakpagebytext "SartaAk" "%CD%\TESTE.HTML" "%CD%\Saida.pdf"

thanks
=================================
We download the product htmltools for evaluation and immediately proceed to purchase the same license.

So we do not have the id of the product, ask if you can help us in this time of testing so we can make a secure purchase on the results.

Send attached the html source and accessories and also the output pdf.

Seen that with the parameter -htm2pdf2 the result with the page size (A4) is perfect and also the adobe reader opens correctly, but does not include the photos

htmltools.exe -view -htm2pdf2 -playemf2 -pdfx -delbreakpagetext -breakpagebytext "SartaAk" "%CD%\TESTE.HTML" "%CD%\test99.pdf"

In the command below the imagins appear correctly, however, does not open adobe reader and the page size is unstable.
htmltools.exe -view -playemf2 -pdfx -delbreakpagetext -breakpagebytext "SartaAk" "%CD%\TESTE.HTML" "%CD%\test99.pdf"

if you can help us at this stage, we are very grateful.

thanks
===================================

Hi,

You can use following command lines to convert your HTML file to PDF file correctly,

Command Line 1:

In your HTML file, please change from

src="file:.\Fotos\950102.jpg"

to

src=".\Fotos\950102.jpg"

then you can run following command line to convert JPEG images from your HTML file to PDF file correctly,

htmltools.exe -view -htm2pdf2 -playemf2 -pdfx -delbreakpagetext -breakpagebytext "SartaAk" "%CD%\TESTE.HTML" "%CD%\test99.pdf"
Command Line 2:

You can run following command line to convert your HTML file to PDF file at A4 paper size, all pages are all use A4 paper size, after conversion be finished completely, you can open output PDF file in Adobe Reader and view it correctly,

htmltools.exe -playemf2 -delbreakpagetext -breakpagebytext "SartaAk" -width 595 -height 842 -nocenter D:\temp4\TesteIn.html D:\temp4\TesteIn.html.pdf

VeryPDF
==========================================

----------------------------------
Command Line 1:

htmltools.exe -view -htm2pdf2 -playemf2 -pdfx -delbreakpagetext -breakpagebytext "SartaAk" "%CD%\TESTE.HTML" "%CD%\test99.pdf"

Removing the file so it worked correctly the inclusion of the image, but "-delbreakpagetext -breakpagebytext "SartaAk" parameter does not break the page correctly.
we want to break is the page header. and always to repeat at top of page.
--------------------------------------------------------------

Command Line 2:

htmltools.exe -playemf2 -delbreakpagetext -breakpagebytext "SartaAk"
-width 595 -height 842 -nocenter D:\temp4\TesteIn.html D:\temp4\TesteIn.html.pdf

worked best, breaking the page correctly, however, does not work the parameter-view, there is a dll error and does not open adobe reader automatically.
Ideally, the command line properly break a page, find the best result and speed. what should I do to make work properly delbreakpagetext -breakpagebytext "SartaAk"
========================================
>>Removing the file so it worked correctly the inclusion of the image,
>>but "-delbreakpagetext -breakpagebytext "SartaAk" parameter does not
>>break the page correctly.
>>we want to break is the page header. and always to repeat at top of page.

Yes, -htm2pdf2 parameter is not compatible with -delbreakpagetext and -breakpagebytext parameters, if you wish use -delbreakpagetext and -breakpagebytext parameters, you can't use -htm2pdf2 parameter.
>>worked best, breaking the page correctly, however, does not work the
>>parameter-view, there is a dll error and does not open adobe reader
>>automatically.

This is a minor problem, after you purchased htmltools.exe product, please email to us your Order ID, we will send a new version of htmltools.exe to you, we will solve the problem for the "-view" parameter in the new version.
>>Ideally, the command line properly break a page, find the best result
>>and speed. what should I do to make work properly delbreakpagetext
>>-breakpagebytext "SartaAk"

thanks for your message, the second command line is meet your requirements, you can always use second command line to convert your HTML file to PDF file.

VeryPDF
================================
We test and we will make the purchase of the product VeryPDF HTML Converter comand line, but, would like to know the following:

1 How long can be downloaded the application, and the new version can be downloaded ?

2. We have another product, (PCL to PDF Convert), and there is some dll, as cimage.dll that will be in two, but the versions are different, we have a problem with that?

3. How much is the application ?

4. in the case of purchase as I have installed the application will only receive a code that I include in my command line?
It would be something like the example: htmltoos.exe ..... -$ Xxxxx.xxxxx.xxxxx?

Thanks
=====================================
>>1 How long can be downloaded the application, and the new version can be downloaded?

You can download HTML Converter Command Line product from following URL,

http://www.verypdf.com/htmltools/htmltools.zip

after you downloaded it, please backup it to a safe place, then you can use it in the future.

>>2. We have another product, (PCL to PDF Convert), and there is some dll, as cimage.dll that will be in two, but the versions are different, we have a problem with that?

You can place HTML Converter Command Line and PCL to PDF Converter to two folders, please don't put them into same folder, then you can call each of them properly.

>>3. How much is the application ?

VeryPDF HTML Converter Command Line Version v2.1 Server License is $399 per server, Developer License is USD2495 per developer, you can purchase one of them from our website directly,

http://www.verypdf.com/htmltools/index.html#dl

>>4. in the case of purchase as I have installed the application will only receive a code that I include in my command line?
>>   It would be something like the example: htmltoos.exe ..... -$ Xxxxx.xxxxx.xxxxx?

Yes, you can register htmltools.exe from command line,

htmltools.exe "-$" "XXXXXXXXXXXXXXXXXXXXX"

if you haven't administrator privilege in current user account, you can also run following command line to convert your HTML file to PDF file,

htmltools.exe "-$" "XXXXXXXXXXXXXXXXXXXXX" "http://www.google.com"  "C:\out.pdf"

After you registered the htmltools.exe application, the trial version of htmltools.exe will be changed to registered version automatically, then you can use it without any restrictions.

VeryPDF

VN:F [1.9.20_1166]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.20_1166]
Rating: 0 (from 0 votes)

Related Posts

This entry was posted in HTML Converter (htmltools) and tagged . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *


Verify Code   If you cannot see the CheckCode image,please refresh the page again!