How to convert wmf to pcx?

PCX is a kind of image format which was the native file format for PC Paintbrush and became one of the first widely accepted DOS imaging standards.

PCX is a raster image format, the file header stores metadata about the image, separately from the actual image bitmap. PCX files commonly store palette-indexed images from 2 or 4 colors to 16 and 256 colors.

PCX file is consisted of three main sections:File header,Image data and Color palette.

The PCX file format has mostly been replaced by newer image formats, but is still used by some fax and scanning applications. Multi-page PCX fax documents use the .DCX extension.

If you want to convert wmf to pcx format file,you can use HTML Converter Command Line which can be downloaded at http://www.verypdf.com/htmltools/htmltools.zip. You can visit http://www.verypdf.com/htmltools/index.html to read the main introduction of HTML Converter Command Line.

Here are the steps to convert wmf to pcx.If you are being confused by this problem,you can read this article.May you can get something useful.

Step 1.Run cmd.exe.

Cmd.exe program can be opened by two ways.The regular one is clicking “start” – “run” ,in popup dialog box you can input “cmd” in “open” edit box,then click “OK”.Please see Figure1 and Figure2.

image

                                   Fiugre1.

image

                                   Figure2.

The other one is hot key.You can press “Windows” + “R” to open the dialog box showed in Figure2.

Step 2.Input command lines.

The command lines should contain called program,source file and target file or not.Please see Figure3.

image

                                                                         Figure3.

The main command line is:

“htmltools.exe” “input.wmf” outpu.pcx

The whole commands to convert rtf to pcx are  "C:\Documents and Settings\admin\Local Settings\Temp\htmltools\htmltools.exe" "C:\Program Files\Microsoft Office\CLIPART\PUB60COR\AN00790_.WMF" 01.pcx

"C:\Documents and Settings\admin\Local Settings\Temp\htmltools\htmltools.exe"  is the path of called program—htmltools.exe which is the key of conversion.It is also the executable file in HTML Converter Command Line.You can drag the file to cmd.exe dialog if the path is too long to you.

"C:\Program Files\Microsoft Office\CLIPART\PUB60COR\AN00790_.WMF"  is the path of source file.

01.pcx  is the name of target file,including file name and extension name.

NOTE:

1.“result=OK” showed in Figure3 stands for the success of the conversion.

2.You can specify the path of target file or not.If you specify the path,the target file will be saved in the location you’ve set.If not,it will be saved in current directory automatically.

Step3.Find target file.Please see Figure4.

image

                                                                       Figure4.

If you want to know more about HTML Converter Command Line ,please visit http://www.verypdf.com/htmltools/htmltools-manual.htm and http://www.verypdf.com/wordpress/.

VN:F [1.9.20_1166]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.20_1166]
Rating: 0 (from 0 votes)

Related Posts

This entry was posted in HTML Converter (htmltools) and tagged . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *


Verify Code   If you cannot see the CheckCode image,please refresh the page again!