If you had a helpful file converter, your conversion job would not be tedious. PCL Converter is the fastest and most accurate converter of PCL, PXL, PX3 to PDF, TIFF and other distribution formats. Integrate high-volume batch conversion into your server-based application or workflow. If you are interested, please take below part as reference. This article uses tiger.px3 file for example to convert px3 to ps and rotate page through PCL Converter command line.
The first step—Downloading
Follow this link to download PCL Converter command line
https://www.verypdf.com/pcltools/index.html
The whole package is just of 6.04 MB, making the downloading swiftly.
The second step—Launching
You have to launch command prompt window. Because the command line is bound to be operated under the MS-DOS environment. The procedure is easy, and the following pictures will guide you.
1) Click “start” and then go to “Run”
2) Input “cmd” into the following
3) Press “ok”, you will find command prompt window popping up
The third step—Inputting
Input command line to convertpx3 to ps and rotate page, the command line can be describes as follows,
pcltool.exe -rotate 90 D:\in.px3 D:\out.ps
where
- D:\in.px3 is to specify a px3 filename or a directory for input,
- D:\out.ps is to specify the ps file name for output,
- -rotate 90 is to rotate page by 90 degree.
Once the input is done, press “enter” key, you will see,
The fourth step—Checking
Open the file to check, screenshot again
Through the above procedures you will see the PCL Converter command line is quite easily to operate, and please open ps file in a computer with a ps reader or just convert ps to pdf file. Once again, you can use other numbers to rotate page in line with your need.