How to convert documents of HTML to PGM?

There are three internal applications in the professional converter—VeryPDF Document Converter. It is good at converting any printable documents to image formats and if you want to convert document of html to pgm, you can choose Document Converter as your helper.

The internal applications are GUI application, command line application and virtual printer application. You can use the GUI application to convert documents to documents in batch, use the command line application to develop software and use the virtual printer application to save paper and ink.

In fact, the virtual printer application docPrint can also be seen as a document converter because it has a friendly and clear interface in which you can realize the conversion from any printable documents to image formats, including html to pgm of course. The most important point is that docPrint is easy to use and master. You just need to print the document to docPrint for launching it.

To use docPrint, you should download Document Converter at http://www.verypdf.com/artprint/docprint_pro_setup.exe first. After installing it to your computer, you will see docPrint in the printer list. To start the conversion from html to pgm, please open the html document at first and follow the steps below one by one.

1. Run the printer driver.

In the opened HTML document, please click “File”—“Print” or use the hot key “Ctrl”+ “P” to open the “Print” dialog box. In the “Printer” combo box of “Print” dialog box, you should choose “docPrint” as the current one from all the installed printers on your computer and click on “OK” button.

If you have set docPrint as the default printer, the word comes easier. You just need to right click on the HTML document instead of opening it with some kind of browser and click the “Print” option in the dropdown list, which can skip some operations and can run docPrint directly.

2. Open the “Save As” dialog box.

To run the conversion from html to pgm and save the target file, you should open the “Save As” dialog box through the popup docPrint main window. You can click “File”—“Save as” in the window. Or click the “Save File” button in the toolbar. You can also use the hot key “Ctrl”+ “S” to open this dialog box.

3. Save the target file.

In the “Save As” dialog box which is shown in Figure1, you will see some combo boxes and one edit box. The “Save in” combo box allows you to choose an output location for the target file. In “File name” edit box, you can input the name of the target file. The “Save as type” combo box supplies all the supported output formats and you should choose the right one. Then please click “Save” button.

save html to pgm

                                             Figure1.

When the conversion from html to pgm is over, you can find the target file in the location you have just set in “Save in” combo box and check the target file. If you want to know some more information about Document Converter, you can visit its homepage by clicking here.

VN:F [1.9.20_1166]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.20_1166]
Rating: 0 (from 0 votes)

Random Posts

This entry was posted in docPrint Pro. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *


Verify Code   If you cannot see the CheckCode image,please refresh the page again!