Previous Next

                                                    826
         CHAPTER 9                                                           Multimedia Features




FIGURE 9.11 Rendering of the 3D artwork using View2 (cross section rotated around the y axis by -30 degrees)


         Figure 9.11 shows the cross section specified for the 3DView that references
         CrossSection2. This cross section specifies a plane that differs from the one speci-
         fied in CrossSection1 (Figure 9.10) in the following way:
         • Perpendicular to the X axis, rotated -30 degrees around the Y axis, and parallel
           to the Z axis: /O [ null -30 0]

Previous Next