VeryPDF Knowledge Base

How to convert OpenOffice to BMP image?

2011/10/09

You can use VeryPDF docPrint Pro to convert OpenOffice to BMP image in a very convenient way. If you don’t have one, please go to download it from www.verypdf.com. You can use the evaluation version for 100 times before you buy it. This article aims to show you how to convert OpenOffice to BMP image.

Step 1: Open VeryPDF docPrint Pro. There are two ways to open it:

Double click the icon of docPrint.
Select the icon of docPrint, right click the mouse and click “Open” on the menu.

Step 2: Add file(s). There are also two ways to add files to the list box

Select the OpenOffice file(s) you want to convert, and then, with the mouse button held down, drag the file(s) to the list box.

Figure 1. List box

Click “Add file(s)” on the panel , then a dialog will pop out. Select the OpenOffice file(s) you want to convert and Press “Open” to add it/them to the list box.

Figure 2. “Add File(s)” button

Step 3: Set output format

Click “Setting”, then a dialog will pop out. Select the “Output format” to “.bmp” on the drop down menu. Click “OK”

Figure 3. Drop down menu of “Output format”

Step 4: Conversion

Click “Start” on the panel, and again a dialog will pop out. Select the directory to save the outputting bmp image(s) and click “OK”.

Figure 4. “Star” button

After a few seconds, when the icon of a printer disappears from the status bar, the computer will open the BMP image(s) by default.

Rating: 0.0/10 (0 votes cast)

Rating: 0 (from 0 votes)

pdf editor

An exact way to adjust margin of pdf file

2011/10/09

Under “verypdf pdf editor” pdf file can be revised, except for the content that can be changed the margin of pdf file can be done too. In “verypdf pdf editor” there are three samples for choice, they are easily classified as small size, medium size and large size. But if we need an exact margin the three samples can’t satisfy, here I introduce the way to solve this problem.

At the bottom of “verypdf pdf editor”, when it’s opened and a pdf file added, an adjustment for margin of pdf file enters your eyes, you can make various margin which suits for your preference. In detail there are two methods for operation.

Method 1: Directly click the buttons to magnify or shrink the margin. Every click change the margin 10 percent, you can also choose the ready percentage from the adjustment box. Look at the illustration below:

Method 2: Enter the certain percentage figure in the percentage box, then press “Enter” key. Look at the illustration below:

The largest margin supported in the software of “verypdf pdf editor” is 500 percent, and the least is 5 percent.

Rating: 0.0/10 (0 votes cast)

Rating: 0 (from 0 votes)

pdfcamp printer

How To Create PDF-Files from Open Office?

2011/10/09

Open Office.org, commonly known as OOo or Open Office, is an open-source application suite whose main components are for word processing,spreadsheets, presentations, graphics, and databases. Open Office is available for a number of different computer operating systems, is distributed as free software. It supports the ISO/IEC standard Open Document Format (ODF) for data interchange as its default file format, as well as Microsoft Office formats among others. Open Office.org supports over 120 languages. As free software, users are free to download, modify, use and distribute Open Office.org.

You may use Open Office to create a word file and need to share it with others online or send it as a mail.To protect your information well(not to be copied or modified freely),converting the file to a pdf file will be practicable.Of course,PDFcamp Printer will do you a great favor.

There are several steps to converting Open Office file to pdf files by PDFcamp Printer and I will introduce to you.

1.Open a Open Office file you want to convert,for example,a text document.Before converting,you need to check whether there are any mistakes in your document,if so,you can correct them to make your document perfect.

2.Click “File”—“Print” or press “Ctrl”+”P”to print your document to pdf file by PDFcamp Printer.In printer option,you will see all the printers installed in your computer and you should select PDFcamp Printer.

3.Set all the parameter by clicking “properties”.You can set many kinds of parameter according to your need such as Links,Finish,Email,Page Setup,Compression,Doc Info,Save As,Font Embedding,Security.

4.After setting all the parameter,you should click “OK” and “Print”,then find a location for your resulting pdf file and save it.

5.At last you will see a new pdf file and the work is finished.You can share it online or send it to your friends.

Rating: 0.0/10 (0 votes cast)

Rating: 0 (from 0 votes)

pdf editor

The margin can change and the location can move by use of verypdf pdf editor

2011/10/082011/10/08

At the bottom of “verypdf pdf editor” there are three versions about pdf file’s margin, divided into small, medium and large, the large version reach to full screen, and the order of these three versions displayed in verypdf pdf editor is medium, small and large. Look at the illustration below:

This is the medium version of pdf.

This is the small version of pdf.

This is the large version of pdf.

The location can move means that those icons in the toolbar of verypdf pdf editor can exchange location with each other and change former location to a new position, even conceal themselves.

On the left of every item (item indicates those icons of toolbar ) there is a line similar with a boundary, drag the boundary then on its right the icons to which belong move together. Look at the illustration below:

Also, you can conceal it, double-click the icon that you want to conceal, then click the sign “X”. Look at the illustration below:

Rating: 0.0/10 (0 votes cast)

Rating: 0 (from 0 votes)

docprint pro

How to print Access document to PDF

2011/10/08

There are various methods for you to print Access document to PDF file via VeryPDF docPrint Pro. If you don’t have one, please go to download it from www.VeryPDF.com. This article will mainly introduce how to print multiple Access documents to PDF.

Method 1: print multiple Access documents to multiple PDF files

Step 1: run VeryPDF docPrint Pro. You can either double click on the icon of the software, or right-click with the mouse on the icon of it.

Step 2: add the files

Press the key Ctrl and click all the Access documents you want to convert, then drag them to the list box of docPrint.

Step 3: set output format option

Click on “Setting”, the second icon at the bottom of the interface.

Then, a box will pop out, and you will find five tabs near the top of the box as illustrated below:

The computer will present the content of the first tab by default. Select the “Output Format” to “.pdf” and click “OK”.

Step 4: Set PDF mode

Click the third tab “Save PDF Mode”, a new box will pop out. Then, click on the button of the second option under “Make PDF files mode” as illustrated below:

Before you go to the next step, press “OK” .

Step 5: click “Start”, and select the directory to save the outputting PDF files.

In a few seconds, when the printer icon disappear from the status bar in the right-down corner of the screen, it means the PDF files are already. Moreover, the computer will automatically open the PDF files by default.

Step 6: Click on one PDF file and press Ctrl+P, select “name” to “docPrint”, and press “OK’.

Repeat this step untill add all the PDF files to the printer, and then print those PDF files.

Method 2: print multiple Access documents to one PDF file

Repeat Step 1 to Step 3 and skip to the next steps. This is because the computer will combine documents to one PDF file by default.

Rating: 0.0/10 (0 votes cast)

Rating: 0 (from 0 votes)

M	T	W	T	F	S	S
« Apr
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31